MB Rapid Lift RL-26 T-Bar Anchor

The RL-26 T-Bar Anchor gets its name from the horizontal bar running through the bottom portion of the anchor to form an inverted T. This design produces exceptional pullout strength for use in back-stripping and panel rotation applications. The T-Bar Anchor is available in the sizes shown in the table and in plain or hot dip galvanize finish.

This anchor uses the standard 4-ton recess members and for face lift applications can be furnished assembled with the T-Bar Anchor Base, Void, and Cover. The Base/Void/Cover package can be purchased as a separate package or can be ordered and installed at the factory. If you want the package installed at the factory, it must be specified at the same time the anchor order is placed.

The T-Bar Anchor uses Rapid Lift 4-ton or Super Lift II (Tilt-Up system) accessories. To use the T-Bar Anchor with the Anchor Base/Void/Cover package, order the anchors by panel thickness. For example: for a six-inch panel use a 5-1/4” anchor. The anchor plus 3/8” setback and the 3/8” for the base equals 6” for the slab thickness.